...
At the end of this article, you will be able to configure a SIP Device from Phonon Central to the Softphone behind a Proxy. The article will also assist you with the softphone configuration process.
| Table of Contents |
|---|
Configuring a Phonon Central SIP device with IPPhone.
Here for the configuration, we are using the Grandstream IPPhone and this document will help configure the Grandstream IP Phone behind the Proxy towards Phonon Central.
For Configuring the IPPhone we need the below details.
Softphone Username
Softphone Password
SIP Proxy IP
SIP Domain
Next, you should enter the chosen device information on the IPPhone web login. Firstly, the Softphone Username and the Softphone Password.
Configuration of Grandstream IPPhone
To access the IPPhone Web GUI:
Connect the computer to the same network as the phone.
Make sure the phone is turned on and shows its IP address. You may check the IP address on LCD.
Open a Web browser on your computer.
Enter the phone’s IP address in the address bar of the browser.
Enter the administrator’s login and password to access the Web Configuration Menu.
Notes:
The computer should be connected to the same sub-network as the phone. This can be easily done by
connecting the computer to the same hub or switch as the phone is connected to. In absence of a
hub/switch (or free ports on the hub/switch), please connect the computer directly to the PC port on the
back of the phone.If the phone is properly connected to a working Internet connection, the IP address of the phone will
display in MENU → Status → Network Status. This address has the format: xxx.xxx.xxx.xxx,. Users will need this number to access the Web GUI. For example, if the phone has IP address 192.168.40.154, please enter “http://192.168.40.154” in the address bar of the browser.When changing any settings, always SUBMIT them by pressing the SAVE button on the bottom of the
page. After submitting the changes in all the Web GUI pages, reboot the phone to have the changes
take effect if necessary. All the options under Basic Setting and Account Setting, and most of the options under Advanced Settings do not require a reboot after submitting the changes. Under Advanced Setting, the parameters on network configuration require a reboot after the update.
This section describes the options in Grandstream IPPhone Web GUI. you can log in as an administrator
Status: Displays the Account status, Network status, and System Info of the phone.
Account: To configure the SIP account.
SIP Account Registration.
To Configure the SIP account. Login to Websui as admin and follow the below option to reach the account general settings.
Account → Account1 → General Setting
...
Now You need to give the below details to register the SIP Device.
Account Active | This field indicates whether the account is active. The default setting is “Yes”. |
Account Name | The name associated with each account to be displayed on the LCD. |
SIP Server | The URL or IP address, and port of the SIP Domain provided by Phonon Team. |
Outbound Proxy | IP address SIP Proxy. |
SIP User ID | Softphone Username information provided by Phonon team. |
Authentication ID | Softphone Username information provided by Phonon team. |
Authentication Password | Softphone Password information provided by Phonon team. |
Name | Softphone Username information provided by Phonon team. |
Account Display | Softphone Username information provided by Phonon team. |
You can fill in the above details like the below image and select save.
...
Once you have save and apply config then you should able to see SIP Registartion status as below in the sttaus page.
...
You are now ready to make your first call using Phonon Central.
Your account does not register?
If there is no configuration identified. Kindly go back to the previous screens and recheck teh entries with configuration details received from Phonon Team.
There is an error message? Check the most common informational and error messages.
Configuring a Phonon Central SIP device with Softphone.
Here for the configuration, we are using the Zoiper Softphone and this document will help configure the Zoiper behind the Proxy towards Phonon Central.
...
There is an error message? Check the most common informational and error messages.
You are now ready to make your first call using Phonon Central.
...
Now You can log in on Phonon Central and initiate the login. Once you initiate login you can get a call like the below image. You can answer the call and start the calling using Phonon Central.
...
SIP RESPONSE CODES
SIP 401
It is sent by the server and means there is something wrong with the account credentials you configured.
Try to put your username in the "authentication username" field in the account options.
...